SKYROBE The Skyrobe, utilised for over 30 years, is noted for its reliability and ease of use. We have up-dated and improved the Skyrobe's design, and is now available with a new sealing head. The new design allows the hanger and garment to be encapsulated into the bag giving a complete protective seal, and does away with the need for over bagging. The seal is an impulse ribbon-seal which is clean, safe and odour-free. The Skyrobe is available in both air-operated and manual forms. By way of a specially designed device, the polythene is automatically opened as the operator covers the garment. Manually or by air; with one easy operation the item is sealed. Up to 240 garments per hour can be processed. 20 x 23 Non perforated polythene 100 gauge supplied on 15 kilo rolls. All polythene can be made to specific gauge and roll kilo's. Please phone :- 01488 668955 / 669033 for prices and availability. Click on an image to enlarge Bottom Sealing (Optional) The bottom-sealer is adjustable by simply releasing the locking lever and sliding the unit up or down to the desired height allowing any length of garment to be sealed top and bottom simultaneously, giving rise to faster output and greater productivity. Versatility Using a normal 220.240V power supply and only taking a small amount of space - 2'8" (813mm) square and 7' (2.14m) high, the Skyrobe is neat and portable. The Skyrobe bagging machine (manual operated) is available as a floor standing or wall mounted machine. The Skyrobe is simple to operated with the minimum maintenance. Suitable for various gauges and widths of polythene film. Dimensions:- Floor Standing Skyrobe 1.90 metres high x 0.73 metres wide x 0.51 metres deep Approx 58kgs. Wall Mounted Skyrobe 0.47 metres high x 0.73 metres wide x 0.41 metres deep Approx 54kgs. Electrical Supply:- 220-240v - single phase - 50 cycles. (13amp fused plug) Electrical consumption:- 16 watts per operation (approx). Sealing type:- Low voltage 22 gauge sealing element. Impulse seal (approx. 0.5 seconds at 40v.) Machine Operation:- Load polythene roll onto bobbin shaft and secure in a central position with 2 bobbins supplied. Feed polythene film from back of machine over the back guide and over roller at top of machine. Split polythene tube and feed down either side of rollers on garment hook. The hook should now be inside polythene tube. Place garment/ hanger to be covered onto garment hook and pull polythene film down over garment to required length. Pull machine operating handle sharply down to closed position and hold until red warning light goes out. The operating handle can be returned gently to rest position. Pull garment cover down onto hanger and remove any excess polythene. Remove garment from machine. Machine is ready to cover next garment. This machine is deigned for two handed use by a single operator.